Back to Study Material School Learning

Communication Systems

Communication systems transfer information from one point to another. Every communication system has three essential components: a transmitter (converts th...

Communication Systems

Signals, Modulation, and Modern Communication

Communication systems transfer information from one point to another. Every communication system has three essential components: a transmitter (converts the message into a suitable electrical signal), a channel (the medium through which the signal travels — wires, optical fibre, or free space), and a receiver (reconverts the received signal into the original message). Noise — random, unwanted signals — is introduced during transmission and degrades signal quality. The goal of communication engineering is to transmit information reliably with minimum noise and power.

A signal is a time-varying electrical quantity carrying information. Signals can be analogue (continuously varying, like human speech) or digital (discrete values, typically 0 and 1). The bandwidth of a signal is the range of frequencies it contains. Voice signals span roughly 300 Hz to 3400 Hz (3.1 kHz bandwidth). Video signals require up to 4.2 MHz. The available frequency spectrum is a finite resource, divided into bands for AM radio, FM radio, TV, mobile phones, WiFi, and satellite communication.

Modulation is the process of superimposing the message signal (audio frequency) onto a high-frequency carrier wave, so the signal can be transmitted efficiently over long distances. In Amplitude Modulation (AM), the amplitude of the carrier is varied in proportion to the message signal while frequency remains constant. The modulation index m_a = A_m / A_c, where A_m is the amplitude of the message and A_c is the carrier amplitude; m_a should be less than or equal to 1 to avoid distortion. AM produces sidebands at frequencies (f_c + f_m) and (f_c - f_m), so the bandwidth of an AM signal is 2 f_m.

In Frequency Modulation (FM), the frequency of the carrier is varied in proportion to the message signal while amplitude is constant. FM has better noise immunity than AM and is used for high-fidelity audio (FM radio at 88-108 MHz in India). In digital communication, the binary data modulates the carrier via ASK, FSK, or PSK. The Shannon-Hartley theorem gives the maximum theoretical channel capacity: C = B log2(1 + S/N), where B is bandwidth and S/N is the signal-to-noise ratio.

Propagation of radio waves: ground waves hug the Earth's surface and are used for AM broadcasting (up to a few hundred kilometres). Sky waves are reflected by the ionosphere and can travel thousands of kilometres — used for shortwave radio. Space waves travel in straight lines (line of sight) and are used for TV, FM, and satellite communication. The maximum line-of-sight range between a transmitting antenna of height h_T and a receiving antenna of height h_R is d = sqrt(2Rh_T) + sqrt(2Rh_R), where R = 6.4 x 10^6 m is Earth's radius.

Worked Example: An AM transmitter has a carrier frequency of 1 MHz and a message frequency of 5 kHz. Find the frequencies of the sidebands and the bandwidth. Upper sideband: 1000 + 5 = 1005 kHz. Lower sideband: 1000 - 5 = 995 kHz. Bandwidth = 2 x 5 = 10 kHz.

CBSE Exam Tip: Communication Systems is considered a scoring chapter for Board exams. Focus on definitions (modulation, bandwidth, transducer, attenuation), the block diagram of a communication system, and numerical problems on modulation index and bandwidth. Learn to distinguish ground wave, sky wave, and space wave propagation and state their frequency ranges and applications clearly.