Back to Study Material School Learning

Communication Technologies

A computer network allows multiple devices to share resources — printers, internet connections, files — and communicate with one another. Networks are ...

Communication Technologies

Types of Networks: LAN, WAN, MAN, and Network Topologies

A computer network allows multiple devices to share resources — printers, internet connections, files — and communicate with one another. Networks are classified by geographic size and by the pattern in which devices are connected (topology).

A Local Area Network (LAN) connects devices within a small, defined area: a single room, a floor of a building, or a campus. Your school's computer lab is most likely a LAN. Devices on a LAN communicate at high speed (typically 100 Mbps to 10 Gbps) using Ethernet cables or Wi-Fi. Because LANs cover short distances, they do not need public telecommunications infrastructure, making them fast and relatively inexpensive to maintain.

A Metropolitan Area Network (MAN) spans a city or large campus — perhaps connecting multiple school branches within the same city. MANs typically use fibre-optic cables or wireless links and operate at higher speeds than typical home internet connections.

A Wide Area Network (WAN) covers a large geographic area — a country, continent, or the entire globe. WANs use public telecommunications infrastructure, including undersea fibre-optic cables, satellite links, and leased lines. The internet is the largest WAN in existence.

Network topology refers to the arrangement of devices and cables. In a Bus Topology, all devices share a single central cable (the bus); if the main cable fails, all devices lose connectivity. In a Star Topology, every device connects to a central hub or switch; if one cable fails, only that device is affected, but if the central hub fails, all devices go offline. This is the most common topology in modern LANs. In a Ring Topology, devices are connected in a closed loop; data travels around the ring in one direction. In a Mesh Topology, every device connects directly to every other device, providing high redundancy — even if several links fail, alternative routes exist. This is used in critical infrastructure networks.

Exam tip: CBSE exams frequently ask students to draw and label different network topologies, identify the topology shown in a diagram, and state one advantage and one disadvantage of each topology. Prepare concise points for each.

Transmission Media: Wired and Wireless Communication

Data in a network travels from one device to another through transmission media — the physical or wireless channels that carry signals. Transmission media are broadly divided into guided (wired) and unguided (wireless) categories.

Guided (wired) transmission media use a physical conductor to channel signals from sender to receiver. Twisted Pair Cable is the most common wired medium. It consists of pairs of copper wires twisted together to reduce electromagnetic interference. Unshielded Twisted Pair (UTP) is used in most office and home Ethernet networks (Cat5e and Cat6 cables). Shielded Twisted Pair (STP) adds a foil or braid shield around the pairs for use in electrically noisy environments. Coaxial Cable has a central copper conductor surrounded by insulation and a braided shield. It was widely used for early computer networks and is still used for cable television distribution. Fibre Optic Cable carries data as pulses of light through glass or plastic fibres. It offers extremely high bandwidth, very low signal loss over long distances, and immunity to electromagnetic interference. Undersea internet cables connecting continents are fibre optic. The trade-off is higher cost and the requirement for specialised connectors and splicing equipment.

Unguided (wireless) transmission sends data through the air (or space) as electromagnetic waves without a physical conductor. Radio waves travel long distances and penetrate walls, making them ideal for Wi-Fi, Bluetooth, and mobile phone networks. Microwaves travel in straight lines and are used for satellite communication and point-to-point links between buildings or towers. Infrared signals work over short ranges and require line of sight — television remote controls and some older laptop ports used infrared. Satellite communication uses geostationary satellites orbiting 36,000 km above Earth to relay signals across continents and oceans, enabling global internet access even in remote areas.

Bandwidth (measured in bits per second) and latency (delay in milliseconds) are the key performance characteristics of any transmission medium.

Exam tip: CBSE questions often ask you to compare wired and wireless media or to choose the most appropriate medium for a described scenario. Fibre optic is always the best choice for high-speed, long-distance transmission; Wi-Fi is best for mobile, cable-free devices within a limited area.

Network Devices: Hubs, Switches, Routers, and Modems

Connecting computers into a network requires specialised hardware devices that direct and manage data flow. Understanding what each device does and how they differ is essential for Class 10 and 11 CBSE computer science.

A Network Interface Card (NIC), also called a network adapter, is the hardware component inside a computer that physically connects it to a network. Every NIC has a unique Media Access Control (MAC) address — a 12-digit hexadecimal identifier burned in by the manufacturer. MAC addresses identify devices at the local network level.

A Hub is the simplest network device. It connects multiple devices on a LAN and broadcasts every incoming data packet to all connected devices, regardless of which device is the intended recipient. Every device receives every packet and must check whether it is the intended destination. This wastes bandwidth and creates security concerns. Hubs operate at Layer 1 (Physical Layer) of the OSI model and have largely been replaced by switches.

A Switch is an intelligent hub. It learns the MAC addresses of connected devices and stores them in a MAC address table. When a packet arrives, the switch sends it only to the port connected to the destination device, not to all ports. This dramatically improves network efficiency and security. Switches operate at Layer 2 (Data Link Layer) and are standard in all modern LANs.

A Router connects different networks together — for example, your home LAN to your ISP's WAN (the internet). Routers use IP addresses (not MAC addresses) to determine the best path for each packet to reach its destination. Your home Wi-Fi router does three jobs: it routes packets between your local devices and the internet, it acts as a switch for your local devices, and it provides Wi-Fi wireless access.

A Modem (Modulator-Demodulator) converts digital data from your computer into analogue signals suitable for transmission over telephone or cable lines, and converts incoming analogue signals back to digital. DSL modems use telephone lines; cable modems use TV cable infrastructure. Modern ISPs often provide a combined modem-router-Wi-Fi unit.

Exam tip: the most common CBSE question on network devices asks you to differentiate between a hub and a switch, or between a switch and a router. Key points — hub broadcasts to all; switch sends to specific MAC address; router connects different networks using IP addresses.