Back to Study Material School Learning

Electromagnetic Induction

Electromagnetic induction is one of the most important phenomena in physics and engineering — it is the foundation of generators, transformers, and motor...

Electromagnetic Induction

Faraday's Laws, Inductance, and AC Circuits

Electromagnetic induction is one of the most important phenomena in physics and engineering — it is the foundation of generators, transformers, and motors that power modern civilisation. Faraday's First Law of Electromagnetic Induction states that whenever the magnetic flux through a circuit changes, an electromotive force (EMF) is induced in the circuit. Faraday's Second Law gives the magnitude of the induced EMF: EMF = -d(Phi_B)/dt, where Phi_B = B x A x cos(theta) is the magnetic flux through the circuit (B is field strength, A is area, theta is the angle between B and the normal to the area). The negative sign reflects Lenz's Law.

Lenz's Law states that the direction of the induced current is such that it opposes the change in flux that caused it (consistent with conservation of energy). If the flux through a coil increases, the induced current creates a magnetic field opposing the increase. This is why moving a magnet faster toward a coil induces a larger current.

Self-inductance (L) of a coil is its property of opposing changes in current through itself. When current changes at rate dI/dt, the induced back-EMF is e = -L dI/dt. The unit of inductance is the Henry (H). The energy stored in an inductor is U = (1/2)LI^2. Mutual inductance (M) describes how one coil induces an EMF in another: e2 = -M dI1/dt.

In AC circuits, the RMS (root mean square) values of voltage and current are used: V_rms = V_0/sqrt(2) and I_rms = I_0/sqrt(2). A resistor has resistance R. A capacitor has capacitive reactance X_C = 1/(omega C). An inductor has inductive reactance X_L = omega L. In a series LCR circuit, impedance Z = sqrt(R^2 + (X_L - X_C)^2) and the current I_rms = V_rms/Z. At resonance, X_L = X_C so Z = R and the current is maximum; resonant frequency f_0 = 1/(2 pi sqrt(LC)).

Worked Example: An AC source of peak voltage 311 V and frequency 50 Hz drives a series circuit of R = 100 ohm, L = 0.5 H, and C = 100 microfarad. Find the impedance. X_L = 2 pi x 50 x 0.5 = 157 ohm. X_C = 1/(2 pi x 50 x 100 x 10^-6) = 31.8 ohm. Z = sqrt(100^2 + (157 - 31.8)^2) = sqrt(10000 + 15676) = sqrt(25676) = 160 ohm.

CBSE Exam Tip: The transformer equations are frequently tested: V_s/V_p = N_s/N_p and V_p I_p = V_s I_s (ideal transformer). A step-up transformer increases voltage but decreases current. Power loss in transmission lines is I^2R — reducing current by stepping up voltage greatly reduces transmission losses. Always mention this principle when explaining why power is transmitted at high voltage.