Metals and Non-Metals
Metals are elements that are generally lustrous (shiny), malleable (can be beaten into sheets), ductile (can be drawn into wires), good conductors of heat ...
Physical Properties of Metals and Non-Metals
Metals are elements that are generally lustrous (shiny), malleable (can be beaten into sheets), ductile (can be drawn into wires), good conductors of heat and electricity, and solid at room temperature (except mercury, which is liquid). Metals also have high melting points and high density. Examples include iron, copper, aluminium, gold, and silver.
Non-metals lack most of these properties. They are generally poor conductors (except graphite), brittle when solid, and many are gases at room temperature (oxygen, nitrogen, chlorine). Carbon, sulphur, phosphorus, and iodine are solid non-metals. Bromine is a liquid non-metal. Non-metals have lower melting points than metals. Hydrogen is a non-metal that behaves like metals in some ways.
Chemical Properties of Metals
Metals react with oxygen to form metal oxides, which are usually basic in nature. 4Na + O2 -> 2Na2O. Metals react with water at different rates depending on their reactivity. Sodium reacts vigorously with cold water: 2Na + 2H2O -> 2NaOH + H2. Magnesium reacts slowly with cold water but quickly with steam. Iron does not react with cold or hot water but reacts with steam: 3Fe + 4H2O -> Fe3O4 + 4H2.
Metals above hydrogen in the reactivity series displace hydrogen from dilute acids. Zn + H2SO4 -> ZnSO4 + H2. A more reactive metal can displace a less reactive metal from its salt solution. Cu + 2AgNO3 -> Cu(NO3)2 + 2Ag. Gold, platinum, and silver do not react with most acids and are called noble metals. Aqua regia (a mixture of concentrated HCl and HNO3 in 3:1 ratio) can dissolve gold.
The Reactivity Series
The reactivity series (also called the activity series) lists metals in order of their decreasing reactivity: K > Na > Ca > Mg > Al > Zn > Fe > Ni > Sn > Pb > H > Cu > Hg > Ag > Au > Pt. Metals above hydrogen in the series can displace hydrogen from dilute acids; those below cannot.
This series is important for predicting the outcome of displacement reactions. Zinc can displace copper from copper sulphate solution because zinc is above copper in the series. However, copper cannot displace zinc from zinc sulphate. The reactivity series also explains why more reactive metals (like sodium) are found combined in nature (as compounds), while less reactive metals (like gold and silver) are found free (in native form) in nature.
Extraction of Metals and Corrosion
Metals found combined with other elements in the earth's crust are called ores. The process of extracting metals from their ores is called metallurgy. Less reactive metals like mercury can be obtained by simply heating their sulphide ores: HgS + O2 -> Hg + SO2. More reactive metals like iron require reduction with carbon: Fe2O3 + 3CO -> 2Fe + 3CO2 (in a blast furnace). Highly reactive metals like sodium, potassium, and aluminium are extracted by electrolytic reduction.
Corrosion is the gradual wearing away of metals by chemical reaction with their environment. Iron corroding to form rust (Fe2O3.xH2O) requires both oxygen and water. Prevention methods include galvanisation (coating iron with zinc), painting, alloying (mixing metals), and cathodic protection. Aluminium forms a thin, protective oxide layer (Al2O3) on its surface that prevents further corrosion.
Worked Example and CBSE Exam Tip
Worked Example: Predict whether a reaction will occur when an iron nail is dipped in copper sulphate solution. Iron (Fe) is above copper (Cu) in the reactivity series, so iron is more reactive than copper. Therefore, iron will displace copper from copper sulphate. Reaction: Fe + CuSO4 -> FeSO4 + Cu. Observation: the blue colour of the copper sulphate solution fades as iron dissolves, and reddish copper metal is deposited on the iron nail.
CBSE Exam Tip: The reactivity series appears in almost every board exam. Learn its first ten members in order. For metal and non-metal distinction, remember that carbon (graphite) is a non-metal that conducts electricity — a common exception. Know that metal oxides are basic and non-metal oxides are acidic (for example, SO2 + H2O -> H2SO3). The electrolytic refining process of copper is a standard theory question. Be ready to draw a labelled diagram of the electrolytic cell.